Stop crossing town twice: build one pickup loop for laundry runs
Laundry and dry-cleaning pickup services waste hours backtracking across town. See how to turn a customer list into one efficient loop for $19/month.
If you run a laundry or dry-cleaning pickup-and-delivery service, you already know the real cost of the business isn't the washing. It's the driving.
You get a list of pickups for the morning and a list of drop-offs for the afternoon. On paper they're two separate jobs. On the road, though, half your pickups and half your deliveries are on the same three streets — but because the lists were built separately, or sorted by the order customers called in, you end up crossing the same neighbourhood twice. Once in the morning, once again in the afternoon, sometimes a third time because someone added a same-day rush order.
That's not a small inefficiency. For a one-van operation doing 30 to 60 stops a day, backtracking across town twice can easily add an hour of pure driving that delivers nothing — no picked-up laundry, no delivered orders, just fuel and time. Over a month, that's dozens of hours you could have spent on more pickups, or just gone home earlier.
The real cost of an unsorted route
Most laundry pickup services don't have a routing problem because they're bad at their jobs. They have a routing problem because their customer list is just a list — names, addresses, phone numbers, maybe a note about "leave bag on porch." There's nothing in a plain spreadsheet or a paper order pad that tells you *where* those addresses sit relative to each other. So the natural thing happens: you sort by time slot, or by who called first, or alphabetically, and you drive whatever order that produces.
The result is a route that looks like a scribble instead of a loop. You pass within two blocks of a customer's house at 9am, then drive back to that same block at 2pm for the delivery. Multiply that by a full day's stops and the mileage — and the driver's patience — adds up fast.
The fix isn't a fancy dispatch system or hiring a route planner. It's much simpler than that: know where every stop on your list actually is, on a map, before you start driving. Once you know that, sorting the stops into one sensible loop takes minutes, whether you do it by eye or hand it to any basic route-planning tool.
The problem is that most pickup-and-delivery operators don't have "where every stop actually is" — they have addresses typed by customers over the phone, sometimes missing apartment numbers, sometimes with the street name misspelled, sometimes just "the blue house near the school." Turning a list like that into map locations you can actually sort by distance is the part that normally takes real effort.
Turning your customer list into a route-ready map
This is exactly what CSV2GEO's subscription is built for. You already have your customer list in a spreadsheet — most laundry services do, whether it lives in a scheduling app, a booking form export, or just a spreadsheet you update by hand. You upload that spreadsheet once a day, or once a week if your customer base is fairly stable, and CSV2GEO adds a precise map location — latitude and longitude — to every single address on the list. You get the same spreadsheet back, just with those extra columns filled in.
From there, sorting your stops into one loop instead of two crossings is straightforward, because now you actually know where everything is relative to everything else. You can group nearby pickups and deliveries together, plan the loop so you're never driving past a street you'll need again in three hours, and hand the driver a route instead of a list.
For a laundry pickup service doing a realistic month of routes — figure a few hundred stops a day across pickups and deliveries, several days a week — the Lite plan at $19 a month covers up to 21,000 US addresses a month. That's enough headroom for most single-van or two-van operations to run this every single working day without thinking twice about hitting a limit. You're not paying per delivery or per mile. It's one flat monthly amount, and you can cancel any time your routes change or your business slows down for a season.
How it works
You don't need to know anything about maps or software to do this. It works the same way as sending a spreadsheet to a bookkeeper — you send a file, you get a better file back.
Step 1: Export your list
Pull your customer list — or just tomorrow's pickups and deliveries — into a plain spreadsheet. Most scheduling and booking tools have an export or download button that does this in a couple of clicks. If you're working from a paper order pad, typing addresses into a simple spreadsheet takes a few minutes.
Step 2: Upload the file
Log into your CSV2GEO account and upload that spreadsheet. There's nothing to configure — you're not choosing settings or writing anything technical. You just pick the file and send it.
Step 3: Let it process
CSV2GEO checks every address on your list and works out its exact location on the map. For a normal day's route list, this takes minutes, not hours. You can leave it running while you do something else — packing orders, answering calls, whatever's next on your morning.
Step 4: Download your results
You get the same spreadsheet back, with the map coordinates added as new columns. Nothing about your original list is removed or changed — the new information just sits alongside it.
Step 5: Sort into one loop
Now that every stop has a real location attached, you can sort pickups and deliveries by geography instead of by call order or time slot. Group the ones that are close together, plan a single loop that starts and ends near your base, and hand it to whoever's driving. Whether you do this sorting by eye on a printed map, in a spreadsheet, or by feeding the file into a route-planning app, the hard part — knowing exactly where everything is — is already done.
What this actually saves you
It's worth being honest about what this does and doesn't do. CSV2GEO doesn't plan your route for you and it doesn't replace your driver's judgement about traffic or one-way streets. What it does is remove the guesswork about *where things are*, which is the step that makes good routing possible in the first place.
For a laundry service, that usually shows up in three ways. First, less driving — fewer wasted miles crossing back over ground you've already covered that day. Second, fewer missed windows — when you can see your stops clustered on a map, it's much easier to notice that you promised a 10am pickup on the far side of town right after an 11am delivery next door, before it becomes a late apology call. Third, easier growth — when you take on new customers in a neighbourhood you don't usually cover, you can see immediately whether that neighbourhood fits neatly into an existing loop or needs its own run.
None of this requires new software you have to learn from scratch, and none of it requires anyone on your team to become "technical." If you can attach a file to an email, you already have the skill this needs.
FAQ
Is this hard to set up if I'm not techy at all? No. If you can attach a file to an email, you can use this. You upload a spreadsheet and download a spreadsheet — there's no software to install and nothing to configure.
What happens if a customer's address is messy or incomplete? CSV2GEO does its best to match messy, partial, or slightly misspelled addresses to the correct location. For the small number that genuinely can't be matched — a P.O. box, a description instead of an address — those rows are flagged clearly so you know to follow up with the customer directly, rather than guessing.
Do I need to know anything about maps or GPS to use this? No. You don't need to understand coordinates or map software. The output is just extra columns in your spreadsheet. What you do with them — printing a route map, sorting by area, feeding them into a routing app — is entirely up to you and can be as simple as you like.
Is $19 a month worth it for a small operation? For most single-van laundry pickup services, yes — the time saved from cutting even one backtracked crossing a day usually adds up to far more than $19 a month in fuel and driver hours. The Lite plan covers up to 21,000 US addresses a month, which is comfortably enough for daily routes without watching a limit.
Can I cancel if business slows down or I stop needing this? Yes. It's a month-to-month subscription with no lock-in. You can cancel any time, and there's no penalty for starting again later if your route volume picks back up.
What happens to my customers' address data? Your customer list is used only to add location information and return it to you. It isn't sold, shared, or used to build any kind of marketing list. It's your data, processed once and handed back.
Do I need a new list every single day, or can I reuse one? You can do either. Many laundry services upload their full recurring customer base once and only re-run new or changed addresses after that, since regular customers' locations don't move. Others prefer to run the day's list fresh each morning — either approach works fine within the Lite plan's monthly allowance.
Related Articles
- The real cost of running your own geocoder
- A one-week geocoding pilot playbook
- Geocoding without engineers: an ops guide
- Handling addresses that won't geocode
- From free tier to your first paid plan
--- *I.A. / CSV2GEO Creator*
Use our batch geocoding tool to convert thousands of addresses to coordinates in minutes. Start with 100 free addresses.
Try Batch Geocoding Free →